HPLC - Cecil

Q-ADEPT SYSTEM Q-2: Binary - Low Pressure Gradient This is a low pressure binary gradient forming system. It uses the CE 4100-2 dual piston pump with flow rates from 0.001 to 10mL/ min and a maximum operating pressure of 40MPa. The pump has the facility for mixing two solvents for binary gradients and of course may be used in the isocratic mode. The Adept CE 4200 dual wavelength detector is used with an 8µ L x 10mm flowcell. The Rheodyne valve fitted with a 20µ L loop is mounted with the column on the mounting panel CE 4050. The PowerStream software controller is mounted at the centre of the stack. Full control and data processing are provided for use with Windows XP or Vista. A solvent pump organiser CE 45034 and installation kit 4152 01 00 are also supplied. Q-ADEPT SYSTEM Q-4: Quaternary - Low Pressure Gradient This extremely popular quaternary low pressure gradient system is shown here with a Cecil column oven, which should be ordered extra if required. The CE4100-4 dual piston pump has flow rates from 0.001 to 10µ L/ min and a maximum operating pressure of 40MPa. The pump has all the facilities for gradient formation, with low pressure mixing of up to 4 solvents. Four, proprietary, high performance, high reliability, proportioning valves are used to control up to four solvents and a high performance, low volume, dynamic mixer is used for ultimate gradient quality. The Adept CE 4200 dual wavelength detector is used with an 8µ L x 10mm flowcell. The Rheodyne valve with 20µ L loop is mounted by a small panel to the detector. When an oven is not used the column may be mounted together with the valve on mounting panel CE 4050. Email: k111444888@ yahoo.com, k111222999@ yahoo.com, Telp 081385152874, Magdalena, Telp 082123847472, Lambok...